• lubrication

    The lubrication of the chain drive is crucial. Suitable lubrication can significantly reduce the wear of chain hinge and prolong the service life.There are four ways to lubricate chain drive:1) G

    More
  • The other failure modes of chain drive

    (1) Chain hinge wear. After the hinge wear, the chain link becomes longer, which is easy to cause jump teeth or chain release. In case of open drive, poor environmental conditions or poor lubrica

    More
  • The failure modes of chain drive

    (1) When fatigue failure of chain plate is under the repeated action of loose side tension and tight side tension, the chain plate will suffer fatigue failure after a certain number of

    More
  • The center distance and chain length

    If the center distance of sprocket drive is too small, the packing angle on sprocket is small, and the number of teeth of sprocket meshing at the same time is less. If the center distance is too

    More
  • The sprocket teeth and pitch of the chain

    In order to improve the motion stability of chain drive and reduce the dynamic load, the number of small sprocket teeth is better. But the number of small sprocket teeth should not be too much, otherw

    More