• Bearing rigidity is important, 4 ways to teach you to increase bearing rigidity

    The rigidity of a bearing is the amount of force required to produce a unit deformation of the bearing. The elastic deformation of rolling bearings is very small and can be ignored in most machines. H

    More
  • Effect of temperature on combined bearing efficiency

    The combined bearing will heat up after it starts running, and after a period of time, it is normal at a lower temperature (usually 10 to 40 degrees higher than room temperature). The normal time vari

    More
  • Adjustment of the clearance of the combined bearing

    In order to ensure the normal operation of the bearing, there is usually a proper axial and radial clearance inside the combined bearing. The size of the clearance has a great influence on the rotatio

    More
  • Combined bearing combination

    Since many machine constructions are complicated, multiple sets of bearings are required. This is a combination bearing. A set of rolling bearings bearing a combination of two bearing structures. Such

    More
  • How to prevent the motor from burning up during operation

    1. Always keep the motor clean. During operation, the motor is not allowed to have dust, water stains and other debris at least 3 meters around the air inlet to prevent the inside of the motor from be

    More