Precision deep groove ball bearing is a common rolling bearing. It is mainly used to bear radial load, but when the radial clearance of bearing is increased, it has the performance of angular contact ball bearing, which can bear radial and axial combined load. When the rotating speed is high and the thrust ball bearing is not suitable, it can also be used to bear the pure axial load.

Compared with other types of bearings with the same size, the friction coefficient of the bearing is small and the limit speed is high. But the impact resistance is not suitable to bear the heavy load.

After the precision deep groove ball bearing is installed on the shaft, the axial displacement of the shaft or shell can be limited in the axial clearance range of the bearing, so the axial positioning can be carried out in both directions.

In addition, the bearing also has certain self-aligning ability, and can still work normally when it is inclined with respect to the shell hole for 2-10 seconds, but has a certain influence on the bearing life.

The cages of precision deep groove ball bearings are mostly steel plate stamping wave cages, and most of the large bearings are made of metal solid cages.

Precision deep groove ball bearings are widely used in automobile, tractor, machine tool, motor, water pump, agricultural machinery, textile machinery and so on.

Proper amount of grease has been filled in the assembly, it should not be heated and need not be cleaned before installation, and it does not need to be lubricated in the process of use, so it can adapt to the operating temperature of-30 ℃ to 120 ℃.