-
Failure reasons of rolling bearing
1. Wear failure Wear failure refers to the failure caused by the continuous wear of metal on the working surface, caused by the relative sliding friction between the surfaces. Continuou
More -
Failure modes and countermeasures of rolling bearings - rust corrosion
The rust and corrosion of bearings include raceway, pit rust on the surface of rolling body, overall rust and corrosion. The rust and corrosion of bearings will cause ring, pit rust on the surface of
More -
Failure modes and countermeasures of rolling bearings - cage fracture
The fracture of cage belongs to accidental abnormal failure mode. The main reasons are as follows. 1. Abnormal load of cage If the installation is not in place, tilt, excessive interference
More -
Failure modes and countermeasures of rolling bearings
The channel is in a symmetrical position in the circumferential direction. The symmetrical position spalling is manifested in the circumferential symmetrical position of the inner ring and the ci
More -
Failure cause of rolling bearing
Rolling bearing is one of the indispensable basic components of running machinery. Although the volume of rolling bearing is small and low cost, once the rolling bearing fails, the loss to the running
More