-
The installation of aligning roller bearing
The aligning roller bearing is equipped with a roller bearing. The curvature center of the outer ring raceway surface is consistent with the bearing center, so it has the same central function as the
更多 -
The basic parameters and applications of aligning roller bearing
The aligning roller bearing has two lines of symmetrical spherical roller. The outer ring has a common spherical raceway, and the inner ring has two inclined ones with the bearing axis. Angle of
更多 -
Aligning roller bearing
The aligning roller bearing is a ball bearing with a drum roller between the inner ring with two raceways and the outer ring with a spherical raceway. The aligning roller bearing has two rows of rolle
更多 -
Other matters needing attention of hydraulic system
If the actuator has the requirement of speed regulation, it should meet the requirement of speed regulation and reduce power loss as far as possible when selecting the speed regulation loop. Common sp
更多 -
Some matters needing attention of hydraulic system
A mechanical common sense should be known that energy can convert each other. Applying this knowledge to the hydraulic system to explain the power loss of hydraulic syste
更多 -
Other control scheme for hydraulic system leakage control
Solution 1: reducing the wear of moving sealMost of the movable sealing parts are precisely designed. If the movable sealing parts are qualified in processing, correctly installed and properly us
更多 -
Some control scheme for hydraulic system leakage control
Option 1: solution to design and manufacture defects1. The choice of external matching of hydraulic components often plays a decisive role in the leakage of hydraulic system, which decides o
更多 -
Hydraulic system maintenance
A system is generally rinsed before formal input. The purpose of rinsing is to remove the contaminants, metal scraps, fiber compounds, iron cores, etc. that remain in the system. In the first two hour
更多 -
Types and sources of contaminants
Pollutants are substances that harm the system in the oil of the hydraulic system. They exist in different forms in the oil, and can be divided into solid pollutants, liquid pollutants and gaseous pol
更多 -
Maintenance of hydraulic system
The stand or fall of a hydraulic system depends not only on the performance of the rationality of the system design and system component, also pollution prevention and treatment in the system. Th
更多 -
The conclusion of parameter measurement
Parameter measurement method is a practical and new method for fault diagnosis of hydraulic system. It combines with logic analysis method and greatly improves the speed and accuracy of fault diagnosi
更多 -
Principle and method of parameter measurement
As long as the operating parameters at any point required in the hydraulic system loop are measured and compared with the normal value of the system, it can be judged whether the operating parame
更多 -
Fault diagnosis system based on parameter measurement
Whether a hydraulic system works normally, it depends on two main operating parameters that whether the pressure and flow are in normal working state, and whether the system temperature
更多 -
The traditional method to find faults of hydraulic system
It is logical analysis which is gradually close to break. The basic idea is comprehensive analysis and condition judgment. That is to say, maintenance personnel determine the cause of failur
更多 -
General principles of fault diagnosis for hydraulic system
Correct analysis of fault is the premise of troubleshooting. Most system faults do not occur suddenly, and there is always a warning before the occurrence. When the warning develops to a certain
更多 -
Fault diagnosis of hydraulic transmission system
Hydraulic transmission system has been widely used in various fields due to its unique advantages, which has extensive process adaptability, excellent control performance and lower cost. Because&
更多 -
Common fault of hydraulic system-hole phenomenon
Phenomenon: if the hydraulic system is permeated with air, the bubbles in the liquid will rapidly burst under the action of high pressure as the liquid flow moves to the area with high pressure, causi
更多 -
Other common faults of hydraulic system
Hydraulic impactCause: actuator reversing and valve closing cause transient pressure peak of flowing liquid due to inertia and some hydraulic components, which do not react sensitively enough,&nb
更多 -
Common faults of hydraulic system
The pressure loss. Due to the viscosity of the liquid, there is inevitable friction in the flow of the pipeline, so the liquid must lose some energy in the flow process. This part of energy loss mainl
更多 -
The hydraulic system structure
The hydraulic system consists of two parts: signal control and hydraulic power. The signal control part is used to drive the control valve in the hydraulic power part.The hydraulic power part is repre
更多
